Yes, if the 15A fuse is not available, you can connect the illuminated logo circuit to the 10A fuse.You can check the image we attached, which shows where your customer connected the illuminated logo. This should serve as a helpful reference for your installation.

When installing the VW LED emblem, drilling a hole is necessary to thread the wire through.
Yes, you need to drill a hole to thread the wire. When drilling, ensure you leave a larger space to thread the wire.

No, you cannot adjust the brightness of the VW Led Emblem by yourself. The only method is to paste a black protective film, like the photo I attached. The customer pasted the black protective film. It does not affect the radar’s operation.

The highlighted cable (Green) is the radar/ACC wire. Do not touch the ACC cable. Splice into the cable/connector that powers the left/right LED bar. Please refer to the attached photo for clarification. Our customer has created a diagram to illustrate this.
After installation, when you start your car, the VW LED emblem and the LED bar will light up together.

There’s no connector of our VW Led Emblem; you need to find the daytime running plug+, plug in, and that’s okay.
The processing of the order is 48-36 hours. The tracking number will send to your email address, if you don’t receive it, please find your trash box or contact us.
You can track via this bellow linking:
https://www.17track.net/en

After you receive the tracking number if there is no track information, please wait for a while, you will see the logistic information, processing needs time. The shipping time is about 7-10days, please pay attention to receive.
If you can not find your tracking number, please contact us.
Our office is at Sheridan, WY. Most of the packages shipped from Hongkong Warehouse.
Besides, there is available in our US warehouse(Will write on the product page).
The shipping time to the US/CA is about 7-9 days. The shipping time to other countries is about 9-12 days.

